Rust port of the Adafruit MiniPOV3 ATtiny2313 firmware because why not :)

Find a file

JSON Alexander 19243f98a2 Adjusted to use attiny-hal		2024-05-09 17:11:06 +01:00
.cargo	REWROTE IT IN RUST	2024-05-07 15:50:56 +01:00
avr-specs	REWROTE IT IN RUST	2024-05-07 15:50:56 +01:00
src	Adjusted to use attiny-hal	2024-05-09 17:11:06 +01:00
.gitignore	REWROTE IT IN RUST	2024-05-07 15:50:56 +01:00
Cargo.lock	Adjusted to use attiny-hal	2024-05-09 17:11:06 +01:00
Cargo.toml	Adjusted to use attiny-hal	2024-05-09 17:11:06 +01:00
LICENSE	Adjusted to use attiny-hal	2024-05-09 17:11:06 +01:00
README.md	REWROTE IT IN RUST	2024-05-07 15:50:56 +01:00
rust-toolchain.toml	REWROTE IT IN RUST	2024-05-07 15:50:56 +01:00

README.md

mini-pov

Rust project for the Arduino Uno.

Build Instructions

Install prerequisites as described in the avr-hal README (avr-gcc, avr-libc, avrdude, ravedude).
Run cargo build to build the firmware.
Run cargo run to flash the firmware to a connected board. If ravedude fails to detect your board, check its documentation at https://crates.io/crates/ravedude.
ravedude will open a console session after flashing where you can interact with the UART console of your board.

License

Licensed under either of

Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.